Connect the board to your computer with an Ethernet cable. This can be a direct connection, without a switch or router. With NFS you can mount a directory from the host computer onto the embedded board over the network, making file exchange as convenient as a local disk access. 1. Configure a stati...
Infrastructure PrerequisitesVerify the following requirements across all nodes before deployment. All machines must reside within the same broadcast domain with full connectivity.Minimum two host machinesUnique Hostnames, MAC addresses, and product UUIDs per hostCentOS 7.9 or equivalent RHEL-based O...
1. Gateway Server and Host Configuration Set up gateway server with dual NICs: ens36: 12.0.0.254/24, ens33: 192.168.241.254/24. Server1 uses 192.168.241.0/24. PC1 and Server2 obtain IP via DHCP. Enable remote SSH access (e.g., Xshell) to Server1 and the gateway. Adjusting Network Interfaces On the g...
Network File System (NFS) ConfigurationInstall the required NFS server packages:sudo apt install nfs-kernel-server nfs-commonCreate a directory to act as the shared resource:sudo mkdir -p /srv/nfs_shareDefine the access rules in the configuration file:sudo nano /etc/exports # Append the following li...
